Documenting the restoration of my growing collection of classic Mustangs
The 65 is getting some upgrades while I build it. To go along with the new front end, I decided to go with a brake upgrade based on a recommendation from Street or Track. I chose the Street or Track 13×1.25″ 4 piston disc setup. This does commit me to a 17″ wheel, but I think that will work well on this car.
Continue reading “Street or Track 13″ Disc Brakes”
At this point, I have worked on a few different types of spindles. I started the restoration on the 67 coupe with 68 disc style spindles. After some issues, I went back to stock 67 spindles, which is what is on the coupe currently, with Wilwood brakes.
Continue reading “Upgraded 65 spindles”
I got the parts in for the linkage and took a few minutes to put it together. I should get a couple nuts to lock it down, but I don’t think it’s going to do any moving anyhow.
Continue reading “Update: Carburetor linkage upgrade”
The dash lights on the convertible don’t work. The bezel is faded with the chrome areas turned to faded grey and peeling. The lenses are fogged, though not as bad as my coupe was. All of this combined tells me it’s a good project to replace some parts and see why the lights aren’t working. Maybe some upgraded bulbs along the way.
Continue reading “New Instrument Bezel and Lenses”
Digging into the convertible, I found a manual choke pull lever under the dash. On the carburetor end, I found a bent cable and a poorly operating choke. Combine this with an early 70’s cable throttle and a jury rigged gas pedal, and I found my next project.
Continue reading “Carburetor and Pedal Replacement”
With the spindles loaded with the new brakes, it is time to tear apart the front end and rebuild it with all new parts. I have new upper and lower control arms from OpenTracker Racing, as well as Street or Track adjustable strut arms, and a roller spring perch from OpenTracker. Since I am replacing drum brakes, I will probably have to fabricate some lines as well, so they line up with the new disc demarcation point for the flexible lines.
Continue reading “Front Suspension Replacement”