Documenting the restoration of my growing collection of classic Mustangs
With the rear housing hung, its time to finish the rest of the things that get the car back on the ground. This means installing the gear carrier, axles, and brakes. I did this a couple times, and asked Shaun some questions along the way. I am much more comfortable with this setup now, but I still have a few things to figure out with the plumbing before it’s done. I am pushing that off until I take the rear off to paint the body.
Continue reading “Street or Track 12″ Rear Disc Install”
Since deciding to go with the automatic for the fastback, I have had to change a few plans and find a few new parts. My project list is influenced by the closest things in the pile of parts in the garage, so I went with the pedal assembly next.
Continue reading “Automatic pedal assembly”
The 65 is getting some upgrades while I build it. To go along with the new front end, I decided to go with a brake upgrade based on a recommendation from Street or Track. I chose the Street or Track 13×1.25″ 4 piston disc setup. This does commit me to a 17″ wheel, but I think that will work well on this car.
Continue reading “Street or Track 13″ Disc Brakes”
The first thing my son said when I brought home his ’67 was that we need to put a bigger motor in it. Our children do become us. I did the same thing and ended up with no engine in the car for many years. I am going to do my best to help him avoid that. To that end, rather than put more work in the front or rear brakes that are on the car, I am working on putting a V8 5 lug setup on it. For the rear, that means recovering an old 8 inch rear end Randy had growing into the earth.
Continue reading “Resurrecting an 8 inch rear”
This is something I probably should have done a while ago. It’s one of the last few things on or under the dash that I need to finish. I have had a taped bundle of parts sitting in the pile from the tear down that I finally opened up and took inventory of and got to work putting it all back together.
Continue reading “Parking Brake”
Brad Albrecht's Mustang Restoration Projects 